CN
English Deutsch Français Español Português
Home > Products > Boring Drill Bits > Cylinder Boring Machine >220V Motorcycle Cylinder Boring Machine, Boring Diameters Φ39-70mm and Depths 160mm

Products

Close
Products

220V Motorcycle Cylinder Boring Machine, Boring Diameters Φ39-70mm and Depths 160mm

Precision Tuning Across a Wide Range: Accommodating diameters from Φ39mm to Φ70mm and depths up to 160mm, this versatile machine adeptly handles various motorcycle cylinder sizes and configurations.

       https://topseller365.com/data/prd/022/766/123456.jpeg

Cylinder Boring Machine T807

Product Overview
The cylinder boring machine T807 is mainly used for boring and maintaining the cylinders of automobiles, and can also be used for repairing engine cylinders of other vehicles. It is a special machine tool for machine repair and can be widely applied to the industries of motorcycle manufacture, maintenance and repair and other machinery manufacture.

Product Parameters
Voltage220V Single-Phase
Power250W
Boring diameter 39-70mm
Max. boring depth160mm
Steps of variable speed of spindle1 Step
Rotational speed of spindle480r/min
Feed of spindle0.09mm/r
Return and rise mode of spindleHand operation
Rotational speed1440r/min
Centering range of centering deviceΦ39-46mm
Φ46-54mm
Φ54-60mm
Φ60-65mm
Φ65-70mm
Product Size 10.63''x13.39''x42.52'' (27x34x108cm)
Notes

1. Do not touch the running parts during operation.

Do not put the hands into the machine.

2. The machine is a specific one for maintaining the cylinder, it must be fixed on the worktable, and the impact should be avoided.

3. Before the motor is started, the feed clutch should be firstly disengaged so as to avoid the phenomenon that after starting, automatic feed is conducted to make the spindle impact on the flat surface and damage the driving system.

4. Before using the new machine, all the oil rings should be wholly filled with oil once and then can be utilized.

5. When the machine is used, it should be frequently kept clean. If it is not used for a long time, the anti-rust grease should be applied to the exposed and finished surface.
Product Features & Advantages

Boring Bar Assembly

　

  • High rigidity and adaptability

  • High positioning and boring precision

  • Meet various requirements of deep hole machining

  • Smooth chip removal and stable cutting performance

　

　　

Handwheel and Clutch

　

  • Easily control the spindle to move
  • Freely switch the manual mode and the automatic mode
  • Low failure rate and stable operation
  • Reduce the operating complexity, the equipment cost and the maintenance cost
    　
　　

Spindle

　

  • High accuracy, rigidity and efficiency
  • Ensure the running stability and precision
  • Improve the machining accuracy
  • Adapt to boring of holes with different specifications
    　
　

Grinding Wheel

  • High hardness and wear resistance
  • Excellent grinding performance
  • Ensure grinding precision and grinding effect
  • Easy to repair and replace and low in maintenance cost
    　

Accessories

　

  • Different sizes and functions
  • Meet different boring requirements
  • User-friendly and customized
  • Improve the user experience and convenience
    　

Usage Method
1. Before boring and repair of the cylinder, check whether the surface of the cylinder is clean and flat and free of dirt and impurities or not.
2. The cylinder to be bored is placed under the base plate of the machine, the center of the cylinder hole is determined, the cylinder body is fixed, and then the boring operation can be carried out.
3. The motorcycle cylinders needing holes with diameters of 39-70mm and depth of being smaller than or equal to 160mm can be maintained. If the suitable fixtures are fitted, other cylinders with the corresponding requirements can also be maintained.
　
Product Display

Last One：220V Cylinder Boring Machine for Engine Repair Manual/Automatic Mechanical Repair Equipment 2.59-5.51 Inch Boring Range Next：无